Skip to main content

Heated Bench Pots

$695.00$1,475.00

Perfect for melting small amounts of compounds that are temperature sensitive. Melt and maintain temperature without burning material.
Clear
Categories: , ,

Pots are made with a cast aluminum inner pot and heavy steel housing.

Unit has adjustable bi-metalic thermostat, loose cover, and carrying bail.

Heating Element

Like all Sta-Warm equipment, these bench pots have the exclusive Sta-Warm multiple circuit elements uniformly applied to the bottom and sidewalls to provide “even-heat”. The low watt densities used result in long life and trouble-free performance.

Control

The four smaller units have highest quality adjustable bi-metal thermostats with a temperature range of 150 - 550 F. The 20 quart pot is equipped with a bulb and capillary thermostat having a range of 200 - 550 F. Special thermostats are available for use with sulphur, paraffin and other low melting waxes in the 100 - 300 F range, with other special temperature range controls available. Specify temperature when special.

Voltages

Pots are available in single phase voltages of 120, 208, or 240 V., or 50 or 60 cycle.

Types

Sta-Warm supplies four standard sizes of round bench pots through 10 quarts capacity with cast aluminum inner pot, loose cover and removable cord and plug. Inserts with bail are available for the 1 through 10 quart size in mild or stainless steel. The 20 quart unit has a welded mild steel inner pot 13-1/2” diameter x 8-5/8” deep. Covers are standard.

Agitators for Tanks

The purpose of agitating materials being heated is to distribute heat more evenly, to maintain inert material in suspension, to reduce melt-down time, or to blend two or more component materials. For these purposes, Sta-Warm offers three types of agitators as shown here. Agitators are usually motor driven by right angle reduction gear motors of the fully enclosed type or, if necessary, of the explosion
proof type.

The simple 2-blade paddle Type “A” rotates horizontally at 29 rpm with blades approximately 1/2” above bottom of tank. This type is usually for maintaining materials in suspension.

Type “B”, with gate-like blades which nearly scrape the tank wall, provides sufficient turbulence to hasten completion of the melt-down process. Speeds are similar to Type “A” above.

Type “C”, which usually operates at 350 rpm, uses marine type propeller and is designed for mixing or
blending low viscosity materials.

Other blades of different types are specified for particular operations and certain materials. Always advise as fully as possible the characteristics of the material to be agitated.

With type “A” and “C” agitators, grates, or screens are recommended in the tank.

Models

Catalog Number Capacity (Quarts) Watts
1WV 1 330
2WV 2 600
4WV 4 880
10WV 10 1540

Special Features

Sta-Warm is prepared to furnish electrically heated tanks of other sizes, shapes, voltages or materials having special controls, outlets, zoned heating, etc., to the user’s particular requirements. Contact us about our confidential data sheet questionnaire.

Sta-Warm can manufacture a heated bench pot that fits your application, offering pots in 2, 4, and 10 quart capacities. If you application requires the heating and mixing of larger batches of plastisols, we also offer a complete line of industrial grade tanks, complete with agitation, and precise temperature controls.

More Information

49WV Pot
Bench Pots Data Sheet
Dimensions for Bench Pots

Heated Pots

Like all Sta-Warm equipment, these bench pots have the exclusive Sta-Warm multiple circuit elements uniformly applied to the bottom and sidewalls to provide “even-heat”. The low watt densities used result in long life and trouble-free performance.

The three smaller units have highest quality adjustable bi-metal thermostats with a temperature range of 200°-550°F. The 20 quart pot is equipped with a bulb and capillary thermostat having a range of 200°-550°F. Special thermostats are available for use with sulphur, paraffin and other low melting waxes in the 100°-300°F. range, with other special temperature range controls available. Specify temperature when special.

Sta-Warm heated pot

We Can Melt it All

Uniform Heating and Stable Temperatures, Even in Transit

Sta-Warm heated equipment works well with wax, plastics, oils, eutectic salts, tar, potting compounds, soaps, resin, glue, paraffin, potting compounds, low melt alloys, soy wax, beeswax, gels and deionized water.

Our heated valves, pipe, and flexible hose conveys molten materials without loss of heat or temperature.

We Build to Suit

Custom Engineered Solutions

Sta-Warm engineers have the experience and know-how to design and build the exact installation you need.

We are happy to provide FREE, NO OBLIGATION estimates based on your production data.

We are Built to Last

Celebrating Over 100 Years of Quality

Sta-Warm has been in the business of designing and building electrically heated industrial equipment and accessories since 1921.

Our products are proudly made in the USA and built to stand the test of time. When you buy from Sta-Warm, you know you are getting the highest quality industrial heating equipment on the market.

100 Years of Quality

Contact Us Today

Let Our Experts Help You Succeed

Sta-Warm engineers and technicians have the experience and knowledge to design and build the equipment your company requires.

If you would like more information about our products, or if you would like a FREE, NO OBLIGATION estimate, please contact us today.

Free Estimate
Drop a file here or click to upload Choose File
Maximum upload size: 67.11MB

Designed and developed by